Products

Cotter Pins 5.5" x 12.5 Gauge 100/pk
$14.25

Cotter Pins 5.5" x 12.5 Gauge 100/pk

Cotter pins are the preferred method of connecting wires to Fiberglass, PasturePro & G2 Poly Posts. A 1/4" drill bit is recommended as it remov...

View full details
$14.25
Cotter Pins 5.5" x 14 Gauge 100/pk
$10.75

Cotter Pins 5.5" x 14 Gauge 100/pk

Cotter pins are the preferred method of connecting wires to Fiberglass, PasturePro & G2 Poly Posts. A 7/32 drill bit is recommended as it remov...

View full details
$10.75
Creating A Family Business, From Contemplation To Maturity by Allan Nation
$35.00

Creating A Family Business, From Contemplation To Maturity by Allan Nation

REVIEW BY JOEL SALATIN   I think I've read 90 percent of what Allan Nation ever wrote, and this book, Creating a Family Business, From Contemplatio...

View full details
$35.00
Crimp Sleeves 10.5 ga Smooth or 14 -15.5 ga Barbed - Pack of 50
$22.75

Crimp Sleeves 10.5 ga Smooth or 14 -15.5 ga Barbed - Pack of 50

Crimp Sleeves 10.5 ga Smooth or 14 -15.5 ga Barbed. Crimps should be compressed into a smooth cylinder when done correctly. 2 crimps per splice req...

View full details
$22.75
Crimp Sleeves 12.5 Gauge - (Packs of 100, 250, or 2000)
from $25.75

Crimp Sleeves 12.5 Gauge - (Packs of 100, 250, or 2000)

 Crimp Sleeves for 12.5 gauge smooth wire. Crimps should be compressed into a smooth cylinder when done correctly. 2 crimps per splice required for...

View full details
from $25.75
Crimp Sleeves 8-10 Gauge - Pack of 50
$29.75

Crimp Sleeves 8-10 Gauge - Pack of 50

Crimp Sleeves for 8-10 gauge smooth wire. Crimps should be compressed into a smooth cylinder when done correctly. 2 crimps per splice required for ...

View full details
$29.75
Donalds Style Wire Strainer
from $4.25

Donalds Style Wire Strainer

Wire strainer with spring clip design for easy tightening in high strain conditions. Tighten with crescent wrench, no special tool required Suitab...

View full details
from $4.25
Double-Throw Cut-Out Switch
$8.25

Double-Throw Cut-Out Switch

Cut-out switches are used for shutting off power to certain fence sections for repairs or to increase voltage to fences where livestock are located...

View full details
$8.25
Double-U End Post Insulator - 10/Pack
$12.75

Double-U End Post Insulator - 10/Pack

This is our preferred end insulator over the bullnose insulator. Mainly, because it is difficult to install incorrectly but it is also extremely du...

View full details
$12.75
Drive Thru Gate 19'
$278.75

Drive Thru Gate 19'

Simply drive thru with any equipment, tractor, feed wagons, round-bale feeders, pick-ups etc... safely without electrical shock to the operator. Sp...

View full details
$278.75
Driver Tool for Ring Insulators
$5.25

Driver Tool for Ring Insulators

Simply insert this tool into your drill and quickly install screw-in ring offsets.

$5.25
Economy Chain Grab
$67.50

Economy Chain Grab

The Economy Chain Grab is designed with a 5' chain, improved wire grab, and hook. Use the hook end of the chain when anchoring at an end post. 770...

View full details
$67.50
Economy Gate Handle
$2.45

Economy Gate Handle

Durable black gate handle recommended for portable fencing. The dramatic curve of the hook of this handle provides polybraid, a secure and reliable...

View full details
$2.45
Electric Fence Basics (How-to-Guide)
$23.00

Electric Fence Basics (How-to-Guide)

Guides authored by Jim & Dawn Gerrish Electric Fence Basics: A beginner’s guide to the installation and use of both permanent and temporary ele...

View full details
$23.00
ElectroNet® 9/35/12 Electric Netting
from $144.00

ElectroNet® 9/35/12 Electric Netting

*Choose between 164' and 82' lengths and option of single or double spike for the posts.  This netting has 9 horizontal strands (bottom wire is not...

View full details
from $144.00
ElectroStop® 10/42/12 Electric Netting
from $132.00

ElectroStop® 10/42/12 Electric Netting

*Choose between option of single or double spike for the posts.  This netting has 10 horizontal strands (bottom wire is not conductive, top 9 are)....

View full details
from $132.00
Extra Bracket for TaraPost Reel-Stand
$30.00

Extra Bracket for TaraPost Reel-Stand

Extra Bracket for TaraPost Reel-Stand *You are buying the bracket only. All other fencing supplies pictured here are for demonstration only.

$30.00
Extreme Tape
from $74.00

Extreme Tape

Extreme tape is 1/2" wide with 6 strands of tinned copper. Extreme tape is made with brightly contrasting white and reds strands, making it highly ...

View full details
from $74.00
Fence Node
$199.00

Fence Node

Smart Fence Monitoring System(requires Monitoring Gateway, not included) Experience real-time fence monitoring with a system designed for durabilit...

View full details
$199.00
Fin Tube Insulator - 4" Pack of 200
$14.25

Fin Tube Insulator - 4" Pack of 200

Tube insulators are the lowest cost option for high-tensile fences. It is installed by sliding the appropriate number (corresponding to the number ...

View full details
$14.25
Fin Tube Insulator - 6" Pack of 200 Sold out
$19.95

Fin Tube Insulator - 6" Pack of 200

Tube insulators are the lowest cost option for high-tensile fences. It is installed by sliding the appropriate number (corresponding to the number ...

View full details
$19.95
Sold out
FloPlast 1" Grip Ring Transition PVC-IPS Sold out
$2.75

FloPlast 1" Grip Ring Transition PVC-IPS

1" Grip Ring Transition PVC-IPS  Compatible with FloPlast IPS-OD compression fittings only.

$2.75
Sold out
FloPlast 1-1/2" x 3 /4" Female NPT Reinforced IPS Saddle Clamp (SDR IPS-OD HDPE PIPE ONLY)
$25.20

FloPlast 1-1/2" x 3 /4" Female NPT Reinforced IPS Saddle Clamp (SDR IPS-OD HDPE PIPE ONLY)

The 1-1/2" Female Reinforced NPT IPS Saddle Clamp will only fit on 1-1/2" SDR IPS-OD HDPE pipe. Easy to use and install. Tap anywhere along your le...

View full details
$25.20
FloPlast 1-1/4" Grip Ring Transition PVC to IPS
$3.60

FloPlast 1-1/4" Grip Ring Transition PVC to IPS

1-1/4" Grip Ring Transition PVC to IPS Compatible with FloPlast IPS-OD compression fittings only.

$3.60
Floplast 1/2" - 1" Hook Wrench
$6.99

Floplast 1/2" - 1" Hook Wrench

Plumbing system compatibility — Compatible with IPS-OD SDR 1/2", 3/4", and 1" FloPlast compression fittings.

$6.99
FloPlast 1/2"-2" Hook Wrench
$18.00

FloPlast 1/2"-2" Hook Wrench

1/2" - 2" Hook Wrench for tightening HDPE compression fittings

$18.00
FloPlast 2" Female NPT Reinforced IPS Saddle Clamps (SDR IPS-OD HDPE PIPE ONLY)
$32.00

FloPlast 2" Female NPT Reinforced IPS Saddle Clamps (SDR IPS-OD HDPE PIPE ONLY)

The 2" Female NPT Reinforced IPS Saddle Clamp will only fit on 2" SDR IPS-OD HDPE pipe. Easy to use and install. Tap anywhere along your length of ...

View full details
$32.00
FloPlast 2" Grip Ring Transition PVC to IPS
$3.75

FloPlast 2" Grip Ring Transition PVC to IPS

2" Grip Ring Transition PVC to IPS Compatible with FloPlast fittings only.

$3.75
FloPlast 90 Tee x Threaded Male Offtake (SDR IPS HDPE PIPE ONLY)
from $24.00

FloPlast 90 Tee x Threaded Male Offtake (SDR IPS HDPE PIPE ONLY)

Compression Fittings are manufactured from high performance thermoplastic materials which resist corrosion and offer impact, UV, and chemical resis...

View full details
from $24.00
FloPlast Compression 90 Elbows (SDR IPS HDPE PIPE ONLY)
from $13.20

FloPlast Compression 90 Elbows (SDR IPS HDPE PIPE ONLY)

Compression Fittings are manufactured from high performance thermoplastic materials which resist corrosion and offer impact, UV, and chemical resis...

View full details
from $13.20
FloPlast Compression 90 Elbows x Threaded Female Offtake (SDR IPS HDPE PIPE ONLY)
from $12.00

FloPlast Compression 90 Elbows x Threaded Female Offtake (SDR IPS HDPE PIPE ONLY)

Compression Fittings are manufactured from high performance thermoplastic materials which resist corrosion and offer impact, UV, and chemical resis...

View full details
from $12.00
FloPlast Compression Valves IPS-OD, PE-PE
from $39.20

FloPlast Compression Valves IPS-OD, PE-PE

  FloPlast® Poly Ball Valve with Compression End Connectors Fast, reliable shut-off for HDPE pipe systems. FloPlast® Poly Ball Valves offer quick a...

View full details
from $39.20
FloPlast IPS 90 TEES (SDR IPS HDPE PIPE ONLY) Sale
from $18.70

FloPlast IPS 90 TEES (SDR IPS HDPE PIPE ONLY)

Compression Fittings are manufactured from high performance thermoplastic materials which resist corrosion and offer impact, UV, and chemical resis...

View full details
from $18.70
Sale
FloPlast IPS Compression x Threaded Female Offtake Tees(SDR IPS HDPE PIPE ONLY)
from $18.20

FloPlast IPS Compression x Threaded Female Offtake Tees(SDR IPS HDPE PIPE ONLY)

Compression Fittings are manufactured from high performance thermoplastic materials which resist corrosion and offer impact, UV, and chemical resis...

View full details
from $18.20
FloPlast IPS Couplings (SDR IPS HDPE PIPE ONLY)
from $11.90

FloPlast IPS Couplings (SDR IPS HDPE PIPE ONLY)

Compression Fittings are manufactured from high performance thermoplastic materials which resist corrosion and offer impact, UV, and chemical resis...

View full details
from $11.90
FloPlast IPS Female Adapters (SDR IPS HDPE PIPE ONLY)
from $9.90

FloPlast IPS Female Adapters (SDR IPS HDPE PIPE ONLY)

IPS Female NPT Threaded Adapters Compression Fittings are manufactured from high performance thermoplastic materials which resist corrosion and off...

View full details
from $9.90

You recently viewed

Clear recently viewed