Products

2" x 1" PVC (Sch. 40) MIP x FIP Bushing

2" x  3/4" PVC (Sch. 40) MIP x FIP Bushing

2-Pin T-Post Insulator, Black, 25/pk Slide-over style. Fits securely around post For installation top of post must not be deformed 25/pack

The 2-Slot Hayes Crimping Tool w/ Cutter is designed to cut, crimp, and strip all common fence wires. A hardened cutter is built into the nose. The...

20' Bungee Gate Kit  For gates 15-20' wide

Ideal for perimeter fencing, MAX-TEN 200 High-Tensile Wire has been a favorite of fence builders for over 30 years. A single wire offers nearly twi...

This wire is strong... How strong? Strong enough for elk herds running into it with the smell of road hunters not far behind. Not strong enough for...

24' Replacement Spring — Restore Your Gate Kit to Full Strength This heavy‑duty, slinky‑style coil provides the same strong tension, reliable retra...

This kit includes a spring gate that extends up to 24 feet, along with two wood‑post pinlock insulators, a three‑hole gate plate, and a durable gat...

3-Hole Gate Hookup Set Includes: 1 - Wood Post Pinlock insulator 1 - 3-Hole Gate Plate 1 - Split-tap Bolt *some assembly may be required

3/4" Apex Xtraflo Long Tail Trough Valve & Float This "long tail" version has a longer threaded end so that it may be inserted through a self-m...

3/4" Apex Xtraflo T/V & Float Top Entry Kit Working pressure (4-175 PSI) High Flow - An operating pressure of 40 - 60 psi = 60 - 80 gallons pe...

Use this transition fitting for attaching the Plasson Quick-Coupler Riser (Pictured here but not included) to a garden hose. Why do I need this fit...

3/4" Hansen Bulkhead Fitting Mounts easily to any portable water tank Male and Female 3/4" NPT Is not necessary if you are purchasing the "Xtraflo...

3/4"-1" Apex Xtraflo Trough Valve & Float  Threaded 1" and comes with 1" x 3/4" reducer High Flow - An operating pressure of 40 - 60 psi = 60 ...

Electric Bungee Gate Cord Is a useful product for variable sized gates as long as the inside rubber remains intact. 6 stainless steel conductors ~...

For use with 3/8" fiberglass rods.

Good, durable crimping tool. Adjustable, long handles and fairly easy to compress sleeves. Crimp sleeves should be compressed into a tight cylinder...

5" Galvanized Brace Pin for H-Bracing Use 5" pin to hold brace rail in place on the end post. You will need a longer 10-12" brace pin to secure rai...

When planning your energizer's ground field, the rule of thumb is, 3' per joule. Example: Speedrite 18000i (18 joule) 18 x 3 = 54' of ground rod le...

When planning your energizer's ground field, the rule of thumb is, 3' per joule. Example: Speedrite 18000i (18 joule) 18 x 3 = 54' of ground rod le...

Use on installed ground rods. Place clamp on top 6" of exposed ground rod and tighten. Thread ground wire through clamp and continue on to final ro...

The 6" Offset Screw-In Ring Insulator holds wires up to 6" off existing fences with this rugged, easy-to-install, screw-in style offset insulator. ...