Cotter pins are the preferred method of connecting wires to Fiberglass, PasturePro & G2 Poly Posts. A 7/32 drill bit is recommended as it remov...View full details
The Pasture Pro Post is the ideal line post in most fencing scenarios. This wood/poly blended post has excellent flexibility, visibility, and is easy to install. In ideal soil conditions only a regular t-post hand driver is necessary. You may also use a gas or pneumatic driver. In rocky and/or hard ground conditions, a pilot driver or even hammer drill may be necessary. To install the wire using the cotter pin method, drill a 7/32" hole where you would like the wire to sit but only after the post has been set. Do not predrill! The grip these posts have to soil once installed is very strong and you will not be able to twist to realign a misplaced hole.
You recently viewedClear recently viewed